< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=117473901453007&ev=PageView&noscript=1" /> How to debug bridge stone cutting machine - WANLONG
Manufacturer of stone machinery and diamond tools |


How to debug bridge stone cutting machine

As an auxiliary tool to help people improve work efficiency and reduce workload, mechanical equipment must go through a certain inspection process before it is officially put into production.

On the one hand, due to the current vast market, there is uncertainty in the quality of equipment. On the other hand, it is because the inspection of the process can make the operator more familiar with the equipment and facilitate future operations. Therefore, it is necessary to debug the stone machinery and equipment. The bridge stone cutting machine is a high-efficiency equipment specially used for cutting stone, so how to debug it before the bridge stone cutting machine is officially put into use?

1. According to the electrical wiring diagram, check carefully to ensure that it is correct before starting the machine.

2. Check the firmness of each motor and the tightness of the belt and chain, and adjust to the best condition.

3. Check the operation of each transmission mechanism to ensure that the operation is flexible, there is no obvious hysteresis, and the connection is firm.

4. Check whether the position of each component is correct and firm.

5. Check whether the protective (dustproof) device is correct and firm.

6. Check the working conditions of each control handle and button to ensure sensitivity and effectiveness. After completing the above inspections, lubricate all lubrication points, and the injected oil should be kept clean. At this time, some parts can be tested one by one.



Leave a Reply

Leave a message