< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=117473901453007&ev=PageView&noscript=1" /> How to maintain the metal cutting blade when it is in use? - WANLONG
Manufacturer of stone machinery and diamond tools |


How to maintain the metal cutting blade when it is in use?

Metal cutting blade is a kind of blade for cutting metal. It has good cutting ability on metal. We all know that metal is a kind of material that is difficult to cut, so with metal cutting blade, it is more and more widely used in the metal cutting industry. The metal cutting blade and the metal cutting machine are integrated, it is a part of the metal cutting machine, and it is an important part, because it is in direct contact with the metal material to be cut.

We all know that metal is difficult to cut, so in our daily life, what we need to do is to maintain the metal cutting machine, and the metal cutting blade is the place that needs to be maintained. Let’s talk about how to maintain it.

Maintenance of metal cutting blades:

1. After using for a period of time, especially the metal is cut, so its sharpness will decrease, and the cut surface will become rough, so we need to repair the metal cutting piece in time, so no new ones can be repaired. It looks like a metal cutting blade, but as long as it doesn’t break its balance, it’s fine.

2. When there is no processing, what we have to do is to use the aperture to hang it, or just lay it flat on a flat surface. Note that the place must be open, and there should not be too many places where the aperture is placed to hang it. There should be a cool, dry place where things pile up.

3. The correction of the inner diameter of the cutting piece and the processing of the positioning hole must be operated by the manufacturer. If the operation is not performed properly during processing, it will not only affect the use effect of the metal cutting piece, but also may be dangerous, so be careful when using it. .In principle, the reaming should not exceed the original diameter of 20mm, so as not to affect the balance of stress.



Leave a Reply

Leave a message